50KN Computer Control Electronic Universal Testing Machine

Usage:

50KN Computer Control Electronic Universal Testing Machine can be used for mechanical properties testing and analysis of metal, non-metal and composite materials. It is widely used in petrochemical, machinery manufacturing, plastic rubber, ceramic building materials, metal materials, construction engineering and other industries. It can be stretched, compressed, bent, sheared and tested under various standards such as GB/ISO/ASTM/JIS/DIN. It can test the yield strength, tensile (pressure, bending) strength, elongation, non-material of materials. Proportional strength, elastic modulus and other parameters.

Features of 50KN Computer Control Electronic Universal Testing Machine:

The specific six buttons on the external host controller are fast up, fast down, slow up, slow down, start, and clear.

protective device.

According to different test positions, the position of the limit switch can be adjusted to effectively prevent the clamp from colliding.

It has protection functions such as overload, over current and leakage.

Specifications of 50KN Computer Control Electronic Universal Testing Machine:

Product Name: computer Control Electronic Universal Testing Machine

1. The maximum test force: 50 KN(5000KG)
2. The test force measuring range: 0.4% - 100%
3. The test force: better than 1%
4. The test force resolution: 1/300000 (not step 6) or equivalent
5. The beam displacement measurement accuracy: the resolution is higher than 0.0025 mm
6. The test speed range: 0.1-500 mm/min, stepless speed regulation
7. The speed control accuracy: ±1% (0.01 ~ 10 mm/min)
8. Constant force, constant strain, constant displacement control range: 0.2% ~100% FS
9. Constant force, constant strain, constant displacement control accuracy:
Settings < 10% FS, value ± 1.0%
Set point > 10% FS, value ±0.1%

10. The deformation rate: control precision rate < 0.05% FS is ±2.0% within the set value
                                                                  A rate ≥ 0.05% FS is ±0.5% within the set value
11. Test space: A: stretch space: 600 mm  B: compressed space: 700 mm

12. The width of between two columns: 410 mm
13. The fixture forms: wedge clamp concrete
       Flat jaw 0 to 7 mm, round jaw Ø 4- Ø 9 mm
14. The compression plate size: 100mm
15. The machine power supply: single-phase 220 v + 10%, 50 hz
16. The work environment: room temperature - 35 ℃, relative humidity less than 80%

17. Machine size:760×500×1950mm